The project demonstrates that an ATtiny10, despite having only 1 KB of flash, 32 bytes of SRAM, and six pins, can function as a USB-controlled RGB light. The firmware implements a deliberately reduced, Little Wire-compatible command set for controlling one WS2812 LED on a fixed pin. Existing Little Wire host programs can therefore operate it, making the tiny circuit usable as a USB status indicator. The goal was not to reproduce the full Little Wire feature set, but to fit a useful subset into a microcontroller normally suited to simple logic tasks.
Fitting USB and LED control into the device required stripping V-USB down to a minimal, interrupt-free implementation. The firmware handles only essential setup requests and fixed replies; while transmitting LED data, it misses a USB packet and relies on the host to resend it. The developer also reduced memory use through assembly workarounds for AVR-GCC’s inefficient memory accesses, manual register allocation, and a 12 MHz calibrated internal oscillator. Removing USB reset handling means the device will not re-enumerate correctly after a bus reset, and USB timing limits practical expansion beyond one or perhaps two LEDs. The final firmware occupies 988 of 1,024 flash bytes and 30 of 32 SRAM bytes, including stack space.
Summary generated by AI from the linked article. hn.today is not affiliated with Hacker News or Y Combinator.