hn.today

Testing a Trash Can Faraday Cage

jefftk.com3 points0 comments
Screenshot of Testing a Trash Can Faraday Cage

The piece examines whether a galvanized steel trash can can protect electronics from an electromagnetic pulse (EMP), a concern prompted by the possibility of a high-altitude nuclear detonation. The writer notes that existing research suggests electronics are generally safer when switched off and unplugged, but wonders whether newer, more sensitive devices - especially battery systems that cannot be fully disconnected - might need extra shielding. To test a low-cost option, he placed a broadband radio-frequency noise generator inside a trash can and measured the signal picked up outside it across frequencies from 24 MHz to 1.7 GHz. He compared the setup with the can open, closed, and closed with conductive tape sealing the lid seam.

The can substantially reduced the signal when its lid was on, often beyond what the receiver could measure. The main weakness was the seam: at the highest tested frequencies, the untaped lid allowed some signal through, with especially poor shielding at a narrow frequency and apparent gaps where the rim flexes. Taping the seam eliminated detectable leakage across the tested range. The experiment could not reliably assess the lower frequencies most relevant to EMP concerns, and its equipment had limited sensitivity; the writer therefore relies partly on electromagnetic theory to estimate that shielding should be even stronger at low frequencies. His practical conclusion is that a taped trash can should work well if extra protection is desired, though keeping electronics off and unplugged may already be sufficient.

Read on jefftk.com0 comments on Hacker News

Summary generated by AI from the linked article. hn.today is not affiliated with Hacker News or Y Combinator.

More in Other

The daily digest

Today's best Hacker News stories, summarized and screenshotted, one email a day.